Section 3: Operational Safety Information; Section 4: Maintenance Information - Xerox XTRAVEL-SCAN - Travel Scanner 100 User Manual

Section 3: Operational Safety Information

Your Xerox equipment and supplies have been designed and tested to meet strict safety requirements.
These include safety agency examination, approval, and compliance with established environmental
standards.
To ensure the continued safe operation of your Xerox equipment, follow these safety guidelines at all
times:
Do These
• Always follow all warnings and instructions that are marked on or supplied with the equipment.
• Before cleaning this product, unplug the product from the USB port. Always use materials specifically
designated for this product, the use of other materials may result in poor performance and create a
hazardous situation. Do not use aerosol cleaners, they may be explosive and flammable under certain
conditions.
• Always exercise care when moving or relocating equipment.
• Always locate the machine on a solid support surface that has adequate strength to support the weight
of the machine.
NOTE: Your Xerox machine is equipped with an energy saving device to conserve power when the machine
is not in use. The machine may be left on continuously.
Do Not Do These
• Never attempt any maintenance function that is not specifically described in this documentation.
• Never remove covers or guards that are fastened with screws. There are no operator serviceable areas
within these covers.
• Never locate the machine near a radiator or any other heat source.

Section 4: Maintenance Information

1. Any operator product maintenance procedures will be described in the user documentation supplied
with the product.
2. Do not carry out any maintenance on this product which is not described in the customer
documentation.
3. Do not use aerosol cleaners. The use of cleaners that are not approved may cause poor performance of
the equipment, and could cause a dangerous condition.
4. Use supplies and cleaning materials only as directed in this manual.
5. Do not remove covers or guards that are fastened with screws. There are no parts behind these covers
that you can maintain or service.
6. Do not perform any maintenance procedures unless you have been trained to do them by an
authorized local dealer or unless a procedure is specifically described in the user manuals.
80
Xerox Travel Scanner 100 User's Guide