Xerox X64005D-WU - 6400 - Flatbed Scanner User Manual page 37

Scanning
Choose Scan Reflective
Using to reset for
scanning paper items.
32
When You're Finished Scanning Transparencies
1. Remove any slides or filmstrips from the slide holder.
2. Replace the empty filmstrip holder into the slide holder.
3. Replace the white cover plate.
Replace the empty filmstrip Replace the empty filmstrip
holder in the slide holder, holder in the slide holder,
then replace the cover plate. then replace the cover plate.
4. Later, when you re-open the Advanced Interface, make sure to
choose Scan Reflective Using to reset PaperPort for scanning
paper items.
If you adjusted the resolution and other settings for the slides or
negatives, reset those settings for scanning paper items.
Xerox 6400 Scanner User's Guide