Chapter 3
Managing Cisco SIP IP Phones
Viewing Status Messages
To view status messages that you can use to diagnose network problems, complete
the following steps:
Step 1
Press the Settings key. The Settings menu is displayed.
Highlight Status.
Step 2
Step 3
Press the Select soft key. The Setting Status menu is displayed.
Highlight Status Messages.
Step 4
Step 5
Press the Select soft key. The Status Messages panel is displayed.
To exit the Status Messages panel, press the Exit soft key.
Step 6
Viewing Network Statistics
To view statistical information about the phone and network performance,
complete the following steps:
Press the settings key. The Settings menu is displayed.
Step 1
Highlight Status.
Step 2
Step 3
Press the Select soft key. The Setting Status menu is displayed.
Highlight Network Statistics.
Step 4
Step 5
Press the Select soft key. The Network Statistics panel is displayed.
The following information is displayed on this panel:
78-10497-02
Rcv—Number of packets received by the phone; not through the switch.
•
•
Xmit—Number of packets sent by the phone; not through the switch.
REr—Number of packets received by the phone that contained errors.
•
•
BCast—Number of broadcast packets received by the phone.
Accessing Status Information
Cisco SIP IP Phone 7960 Administrator Guide
3-31