Configuring Onetouch - Visioneer STROBE XP450 - FOR WINDOWS User Manual

C
ONFIGURING
When you installed OneTouch, the software was configured with the
applications on your computer that you can scan to. The OneTouch button
configuration consists of a Destination Application, a Scan
Configuration, and a File Format. The OneTouch Properties window is
where you select these three elements.
To open the OneTouch Properties window:
There are two methods that you can use to open the OneTouch Properties.
■ Left-click on the OneTouch icon, in the Windows Notification Area,
then right-click on the Scan button. Or, left-click on the detailed
information.
■ Press, hold down for at least 3 seconds, then release the scanner button.
Right-click on the Scan button, Left-click
on the detailed information, or press hold-
down and release the scanner button.
Note: Some of the options on the OneTouch Properties window (and
other scanner windows and dialog boxes) are "grayed out" and are not
available. Grayed out options are not appropriate for your Visioneer
Strobe XP 450 scanner.
O T
NE OUCH
C O T
ONFIGURING NE OUCH
27