Visioneer STROBE 500 - FOR WINDOWS User Manual page 55

48 V S
ISIONEER TROBE
500 S U ' G
CANNER SER S UIDE
For single-sided scans, the scan area is the size of the image. For double-
sided scans, the scan area is the size of the larger of the two areas on the
front and back of the page.
Reduce Moiré Patterns —Moiré patterns are wavy, rippled lines that
■
sometimes appear on the scanned images of photographs or illustrations,
particularly newspaper and magazine illustrations. Selecting Reduce
Moiré Patterns will limit or eliminate moiré patterns in the scanned
image. This option is only available in Color or Grayscale scanning at
lower resolutions.
Straighten Image —Select this option to let the scanner automatically
■
determine if a page is skewed, then straighten its image. The input tray
paper guides should be flush to the edges of the paper to prevent paper
feeding in at too great of an angle.
Invert Image —Only available for Black&White scanning, this option
■
reverses the black and whites of an image.
Original Image.
Duplex —Scan both sides of the page. If this option is not selected, the
■
scanner will scan the face-down side of the page only.
Note: The Simplex and Duplex buttons on the scanner take precedence
over this Page Settings option. In other words, if the selected function on
the scanner is set to scan as Duplex, but you press the Simplex button,
the scanner scans in Simplex, and vice versa.
Skip Blank Originals —Skips pages that are completely blank. This
■
option is only available for Duplex scanning.
Inverted Image.