Load One Pattern From Tape (Load In Patt); Load One Song From Tape (Load In Song) - Alesis SR-16 Reference Manual

7.8 PAGE 5: LOAD ONE PATTERN FROM TAPE (LOAD IN PATT)
This loads a single Pattern from a tape dump. The display says LOAD IN PATT00. Enter
the desired Pattern number with the number or INC/DEC buttons, press the A or B button to
specify the desired variation, then press PLAY; the display says START TAPE...
Press the recorder's Play button. While loading, the display shows the Pattern being loaded.
Upon completion the display says DONE.
Background You may just want to load one Pattern from tape rather than all data. A Pattern being loaded from
tape will take its original position in memory (e.g., PATT 01B will reload back into PATT 01B) and will overwrite any
data currently stored in that location.
Remember that loading a Pattern also loads its associated Fill.
7.9 PAGE 6: LOAD ONE SONG FROM TAPE (LOAD IN SONG)
This loads a single Song of Patterns (not the Patterns used in the Song) from a tape dump.
The display says LOAD IN SONG00. Enter the desired Song number with the number or
INC/DEC buttons, then press PLAY; the display says START TAPE...
Press the recorder's Play button. While loading, the display shows the Song being loaded.
Upon completion the display says DONE.
LOAD IN
A
PATT01
BACKUP
LOAD IN
SONG01
BACKUP
54
PRESS PLAY
PAGE
PRESS PLAY
PAGE