Page 2: Assign Sounds To Pads; Set Pad Volume (Volume) - Alesis SR-16 Reference Manual

4.2 PAGE 2: ASSIGN SOUNDS TO PADS

The display shows the currently selected pad number and the sound assigned to that pad.
You can assign any of the SR-16's sounds to any of the pads, or to more than one pad. Each
individual Drum Set can have its own drum sound assignment.
To assign a sound to a pad:
1. Press the pad (the display will show the pad number).
2. Enter the desired drum sound number with the number or INC/DEC buttons. When using
the number buttons, enter a leading zero if necessary. The chart included with the SR-16
describes each of the over 230 drum sounds.
3. When the display confirms your choice, either store the edited Drum Set (see section 4.8)
or do more assignments by tapping another pad to select it, and assigning a drum sound to it.
4.3 PAGE 3: SET PAD VOLUME (VOLUME)
The display shows VOLUME, the currently selected pad number, and the volume of the
sound assigned to that pad.
FATSNARE
001
DRUM SET
VOLUME
99
DRUM SET
30
DRUM
PAGE
DRUM
PAGE