Table of Contents
Advertisement
Some menus/features are operator dependent.
Useful Information While Talking
During a call, you can change the volume of the ear-
piece, use the display as a scratch pad, send DTMF
tones, and check the duration of the current call.
Changing Volume while Talking
During a call, you can use the volume keys on the side of
the phone to increase or decrease the earpiece volume.
Using the Phone as a Scratch Pad
1 Enter a phone number on the keypad while talking.
When you end the call, the number remains in the dis-
play.
2 Press
to call the number in the display.
YES
Sending Tone Signals
During a call, you can press keys 0 – 9, *, and # to send
DTMF tones. This can be used for banking by phone or
to control an answering machine.
Checking Time or Cost of Calls
When you start a call (incoming or outgoing), the air-
time is counted in minutes and seconds and shown on
the display, like this:
If you want the phone to keep track of the cost, you
need to set that specifically. Also check if your service
14
provider supports that service (see chapter "Knowing
Price and Duration of Calls").
Receiving a Second Call
You will hear a tone in the earpiece and the display will
read
. Press
To reject the second call, press
or simply ignore the call.
to answer the second call.
YES
(zero) followed by
,
0
YES
Advertisement
Table of Contents
