Ericsson CF768 User Manual page 44

Setting the Duration of the Message
1 Select the Send menu.
2 Select the Options submenu.
3 Select Valid Per.
4 Select how long you want the message to be repeated.
The service center repeats the message for the set dura-
tion or until the receiver can receive it.
About Other Message Types
If your service supports it, you can send an SMS from
the phone to the service center and the service center can
change the message into the following types :
• E-Mail (the address cannot contain more than 20
characters)
• Telex
• Fax (Both group 3 and 4)
• X400
• Voice
Changing the Message Type
1 Select the Send menu.
2 Select the Options submenu.
3 Select Msg Type.
4 Select the desired message type.
Some menus/features are operator dependent.
Receiving a Message
You will also hear a beep as loud as the ring signal and
the green light on top of the phone will flash. You will
receive the text message:
Reading an Incoming Message
1 Press when you have received a message.
YES
The display will show the date of the incoming SMS,
you can see the time by pressing *.
2 Press . The display will show from which phone
YES
number the message is sent, or the name if stored in
your phone book.
3 Press ÇÄ to read the message.
After Reading an Incoming Message
1 Call a phone number in the message by pressing
2 Erase the message by pressing
3 Reply to the message if your service supports it.
4 Store the message by pressing
(you may get a reply prompt if the sender has
requested a reply). Press
the message is stored on the SIM.
Erasing a Message
Press any time during the message and press
CLR
Reading an Old Message
1 Select the Read menu.
2 Scroll to the message you want to read and press

.
YES
at the erase prompt.
YES
at the erase prompt
NO
at the Store prompt and
YES
.
YES
.
YES
33