Assembly Instructions - Ericsson CF768 User Manual

Assembly Instructions

This chapter describes how you assemble the phone,
what the Subscriber Identity Module (SIM) Card is, and
how you handle the battery.
About the SIM Card
Contact your service provider if your phone is not
equipped with a SIM card. The SIM Card is a computer
circuit that keeps track of your phone number, the ser-
vices that you have ordered from the service provider,
and your phone book information.
Your SIM Card is supplied with a PIN (Personal Identi-
fication Number) that you may need to enter into the
phone to gain access to the phone and network.
Follow the six steps below to assemble your CF768.
Preparing Your Phone – Six Steps
1 Insert the SIM Card (if not previously inserted).
2 Connect the battery to the phone.
3 Attach the belt clip to the phone (optional).
4 Connect the charger to the phone charger connector.
5 Connect the charger to a standard electrical outlet.
6 Turn the phone ON.
Some menus/features are operator dependent.
Step 1: Inserting the SIM Card
Note! Place the gold side down, clipped corner to left
Removing the SIM Card
Step 2: Attaching the Battery
About the Battery
Your phone is supplied with a Nickel Metal Hydride
(NiMH) battery. The battery is not charged before ship-
ment, but there might be enough power to turn the
phone on.
1