Wan Interface Settings - Using L2Tp - D-Link DFL-700 - Security Appliance Product Manual

WAN Interface Settings – Using L2TP
L2TP over Ethernet connections
are used in some DSL and cable
modem networks.
You need to enter your account
details, and possibly
configuration parameters
actual physical interface that the
L2TP tunnel runs over. Your ISP
should supply this information.
•
Username – The login
or username supplied
to you by your ISP.
•
Password
password supplied to
you by your ISP.
•
L2TP Server IP – The
IP of the L2TP server
that the DFL-700 will
connect to.
Before L2TP can be used to connect to your ISP, the physical (WAN) interface parameters
must be input. You can use either DHCP or Static IP, depending on the type of ISP used.
Your ISP should supply this information.
If using static IP, this information needs to be filled in.
•
IP Address – The IP address of the WAN interface. This IP is used to connect to
the L2TP server.
•
Subnet Mask – Size of the external network.
•
Gateway IP – Specifies the IP address of the default gateway used to access the
Internet. Contact your ISP if you are unsure of the necessity of this information.
also IP
of the
– The