Wan Interface Settings - D-Link DFL-1100 Installation Manual

Network security firewall

Hide thumbs Also See for DFL-1100:

Table of Contents

DFL-1100 Installation Guide

WAN Interface Settings

When you first connect to the DFL-1100, the Setup Wizard guides

you through configuring the basic firewall settings. Your WAN

settings are configured at that time. Should you need to modify

these settings, go to the System tab and click on the Interfaces

button. Click on the

Edit

option next to WAN.

Static IP

If your Internet connection uses a Static IP Address, this information

is provided to you by your Internet Service Provider. All fields are

mandatory except for the Secondary DNS Server.

IP Address: The IP Address of the WAN interface. This is the

address that is used to ping the firewall, remotely control it, and as

a source address for dynamically translated connections.

Subnet Mask: Network and subnet identifier.

Gateway IP: Specifies the IP address of the default gateway used

to reach the Internet.

Primary and Secondary DNS Server: The IP address(es) of your

DNS Server(s). Only the Primary DNS Server is required.

Table of Contents

Netdefend dfl-1100