D-Link DFL-700 - Security Appliance Product Manual page 109

2. Setup PPTP server, Firewall->VPN:
Under L2TP / PPTP Server click Add new PPTP server
Name the server pptpServer
Leave Outer IP and Inner IP blank
Set client IP pool to 192.168.1.100 – 192.168.1.199
Check Proxy ARP dynamically added routes
Check Use unit's own DNS relayer addresses
Leave WINS settings blank
Under authentication MSCHAPv2 should be the only checked option.
Under MPPE encryption 128 bit should be the only checked option.
Leave Use IPSec encryption unchecked
Click Apply
3. Setup policies for the new tunnel, Firewall->Policy:
Click Global policy parameters
Enable Allow all VPN traffic: internal->VPN, VPN->internal and VPN->VPN
Click Apply
4. Set up authentication source, Firewall->Users:
Select Local database
Click Apply
5. Add a new user, Firewall->Users:
Under Users in local database click Add new
Name the new user HomeUser
Enter password: 1234567890
Retype password: 1234567890
Leave static client IP empty (could also be set to eg 192.168.1.200. If no IP is set
here the IP pool from the PPTP server settings are used).
Click Apply
6. Click Activate and wait for the firewall to restart.