Wan Interface Settings - Using Static Ip; Wan Interface Settings - Using Dhcp - D-Link DFL-700 Manual

WAN Interface Settings – Using Static IP
If you are using Static IP, you have
to fill in the IP address information
provided to you by your ISP. All fields
are required except the Secondary DNS
Server. Note: Do not use the numbers
displayed in these fields, they are only
used as an example.
•
IP Address
address of
interface. This
address that may be used
to ping the firewall, remotely control it, and be used as the source address for
dynamically translated connections.
•
Subnet Mask – Size of the external network.
•
Gateway IP – Specifies the IP address of the default gateway used to access the
Internet.
•
Primary and Secondary DNS Server – The IP addresses of your DNS servers;
only the Primary DNS is required.
WAN Interface Settings – Using DHCP
If you are using DHCP, there is no
need to complete any fields.
– The IP
the WAN
is the
16