Maintenance And Care; Troubleshooting - Bissell 8910 - AUTRE User Manual

220-240v
Table of Contents

Advertisement

M
aintenance and care
Machine storage
Once your cleaning is complete, make sure the water tank is emptied
and rinsed out. Put the unit away in a closet or basement for the
next use. The SmartMix tank can remain filled and ready to go
(store with machine set to water rinse setting), or it can simply be
emptied back into the formula bottle if that is more convenient.
Note: Store cleaner in a protected, dry area. Since this product uses
water, it must not be stored where there is a danger of freezing.
Freezing will damage internal components and void the warranty.
Machine care
For best results, a few simple steps can assure your machine is
well maintained after your cleaning is complete.
1.
Turn the power switch OFF ( O ). Unplug the machine and wrap
the power cord.
2.
After emptying the water tank, rinse it out at a faucet with
running hand hot tap water, taking care to clean underneath
the heavy duty bladder, and all around it. Clean out lint trap.
Replace the water tank on the machine.
4.
Clean out the flow indicator filter each time it is used to
ensure best cleaning performance. Unscrew the flow indicator
cap, lift out the red rotor and white filter. Rinse all three
parts with water. Replace the filter and rotor. Replace the
flow indicator cap. Turn until snug, do not over-tighten.
5.
Any loose hair or debris can be pulled from the brush roll if
desired and thrown away.
6.
Wipe the machine's exterior with a soft cloth.
7.
After carpet is dry, vacuum again to remove hair and fuzz.
T
roubleshooting
SmartTemp ready light does not illuminate.
Possible Causes
1. The power switch is not turned ON ( I ).
Reduced spray or no spray.
Possible Cause
1. Bladder may be empty.
2. SmartMix tank may be empty.
16
w w w . b i s s e l l . c o m
ug310-5822_8910E_107.indd 16
ug310-5822_8910E_107.indd 16
Flow Indicator
4
WARNING:
To reduce the risk of
fire, electric shock or
injury, unplug from the
outlet before servicing.
Remedies
1. Turn ON ( I ) the power
switch.
Remedies
1. Refill bladder with hand hot tap water.
2. Fill with BISSELL deep cleaning
formula for cleaning. Fill with
water if rinsing.
1/7/07 8:44:47 AM
1/7/07 8:44:47 AM

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

AromaproAromapro 8910 series

Table of Contents