Cleaning With Attachments - Bissell 8910 - AUTRE User Manual

O
peration

Cleaning with attachments

Your AromaPro machine comes equipped with
a hose and at least one attachment for cleaning
stairs, upholstery, and more.
1. Important! If using to clean upholstery,
check upholstery tags for cleaning
instructions.
A. Check manufacturer's tag before
cleaning. "W" or "WS" on the tag
means you can use your AromaPro. If
the tag is coded with an "X" or an "S"
(with a diagonal stripe through it), or
says "Dry Clean Only", do not proceed
with any deep cleaning machine. Do
not use on velvet, silk, 100% cotton
upholstery, vinyl or
leather. If manufacturer's tag is
missing or not coded, check with your
furniture dealer or manufacturer.
B. Check for colourfastness in an
inconspicuous place.
C. If possible, check upholstery stuffing.
Coloured stuffing may bleed through
fabric when wet.
D. Plan activities to allow upholstery time
to dry.
E. Vacuum thoroughly to pick up loose
debris and pet hair. Use a vacuum with
a brush attachment and a crevice tool
to clean in fabric folds.
2. Follow the instructions on page 9 for filling
the water tank and the formula tank.
3. Set ready tools dial to the tools setting. This
will allow spray and divert the suction to the
hose.
*SmartTemp heats the cleaning solution for
carpet and hard floor application only. It
does not heat solution sprayed through the
accessory tools.
4. Set SmartMix dial to normal.
5. Attach the cleaning tool to the end of the
hose.
6. Plug in and turn on the power switch.
12
w w w . b i s s e l l . c o m
ug310-5822_8910E_107.indd 12 ug310-5822_8910E_107.indd 12
Manufacturer's tag
WARNING:
To reduce the risk of
injury, be extra careful
when cleaning stairs.
Make sure machine is
secure and level.
1/7/07 8:44:00 AM 1/7/07 8:44:00 AM