Stain Removal; Hard Floor Cleaning - Bissell 8910 - AUTRE User Manual

O
peration

Stain removal

Do Not Delay! Attending to an accident soon
after it occurs ensures the chances for full
removal. Leaving it for an extended period of
time may cause it to set and become permanent.
1. Blot up liquids with an absorbent cloth or paper
towels. White materials are recommended
because certain dyes may bleed and make the
stain worse.
2. Gently scrape up any semi-solids with a
spoon or spatula. Do not use a knife or other
utensil with sharp edges because it could
damage the carpet or upholstery.
3. If the area has dried, remove the remaining
semi-solids and residue with a sweeper
or vacuum.
4. Use your BISSELL deep cleaner as a precleaner.
With one of the tools attached to the flex hose,
set the ReadyTools dial to Tools and the
SmartMix dial to Heavy Traffic. Spray the area
with cleaning solution and allow the BISSELL
deep cleaning formula to penetrate for 3-5 minutes.
5. Once the precleaning is complete, use the
attached tool to gently scrub the stain with
back and forth strokes.
6. Allow to dry. Some difficult stains may require
a second treatment.

Hard floor cleaning

Your AromaPro model may have come with a
hard floor attachment and Hard Floor Solutions
formula. If not, these products are available for
purchase by contacting the BISSELL Consumer
Services department by phone or on the website.
The hard floor tool provides effective cleaning for
linoleum, vinyl, and tile floors.
Caution: Do not use on unsealed hardwood floors.
1. Vacuum or sweep thoroughly to pick up any
loose debris and pet hair.
2. Move any furniture, if needed.
3. Empty any carpet cleaning formula back into
the BISSELL bottle if stored in the formula
tank. Fill formula tank with BISSELL Hard
Floor Solutions, available at many retailers,
or contact BISSELL Consumer Services.
14
w w w . b i s s e l l . c o m
ug310-5822_8910E_107.indd 14 ug310-5822_8910E_107.indd 14 1/7/07 8:44:41 AM 1/7/07 8:44:41 AM