Temperature Unit; Heat Indicator Ligh; Dimension One Spas Icon (Logo) Button - Dimension One Spas 01513-192 Owner's Manual

Temperature Unit:

Heat Indicator Ligh t

Dimension One Spas Icon (Logo) Button

26
Aquatic Fitness System
2005 Owner's Manual
Program the Temperature Unit by pressing the PROGRAM button
th
a 5 time. The current Temperature Unit will be visible in the LED
Digital Display Window.
To adjust the Temperature Unit used to measure spa water
temperature, simply use the UP or DOWN Buttons to select
between Fahrenheit (ºF) and Celsius (ºC).
setting is Fahrenheit.
Exit the Programming Sequence by pressing the PROGRAM
th
Button a 6 time. All changes will be saved.
If you do not proceed with the programming within 60 seconds,
the spa will automatically exit the programming sequence and
revert to your previous settings. Any programming changes made
up to that point would be saved.
Heat Indicator Light:
This Light is illuminated whenever the heater is on. Additionally,
the HEAT Icon will also be displayed in the upper left corner of
the LED Digital Display Window.
Dimension One Spas ICON (Logo)®: The time of day can be
viewed by pushing the Dimension One Spas ICON logo on the
far right of the control. If no other button is pushed within 5
seconds, the display will revert to the spa water temperature
reading.
The pre-set fac ory default is Fahrenheit t
Button can change the clock.
The factory default
. Using the PROGRAM