Page of 22

Dimension One Spas home Series Owners Manual

Spa.

   Related Manuals for Dimension One Spas home Series

   Summary of Contents for Dimension One Spas home Series

  • Page 2

    Dimension One Spas – @Home Series Owner’s Manual Spa Information My Spa Model Name: Serial Number: Date Purchased: Date Installed: Gallons/Liters: Notes: Dealer Information: Dealer’s Name: Address: City: State, Zip: Telephone: Fax:...

  • Page 3: Table Of Contents

    Dimension One Spas – @Home Series Owner’s Manual Table of Contents IMPORTANT SAFETY INSTRUCTIONS......................1 IMPORTANT SAFETY INSTRUCTIONS (CANADA) (CSA SAFETY INFORMATION) ......2 HYPERTHERMIA ..............................3 SAFETY DO’S AND DON’TS..........................3 WARNING SIGNS ..............................4 INITIAL STARTUP..............................5 OPERATION ................................8 THE CONTROL PANEL ............................8 PROGRAMMING THE SPA FUNCTIONS......................10 CONTROL PANEL DISPLAY MESSAGES.....................11...

  • Page 4: Important Safety Instructions

    Dimension One Spas – @Home Series Owner’s Manual IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY When installing and using this equipment, basic safety precautions should always be followed, including: • Risk of Accidental Drowning. Extreme caution must be exercised to prevent unauthorized access by children.

  • Page 5: Important Safety Instructions (canada) (csa Safety Information)

    Dimension One Spas – @Home Series Owner’s Manual IMPORTANT SAFETY INSTRUCTIONS (CANADA) (CSA SAFETY INFORMATION) In addition to the preceding safety instructions, Canadian owners should read and understand the following information from the Canadian Safety Association: READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY •...

  • Page 6: Hyperthermia, Safety Do's And Don'ts

    Dimension One Spas – @Home Series Owner’s Manual • Do not permit electric appliances (such as a light, telephone, radio, television, etc.) within 1.5m of this spa or hot tub. • AVERTISSEMENT: NE PAS PLACER D’APPAREIL ÉLECTRIQUE (LUMINAIRE, TÉLÉPHONE, RADIO, TÉLÉVISEUR, ETC.) À MOINS DE 1.5 M DE CETTE CUVE DE RELAXATION.

  • Page 7: Warning Signs

    Dimension One Spas – @Home Series Owner’s Manual Warning Signs Each spa has been provided with a Warning Sign and an Important Notice label. This label outlines safety precautions. This sign should be permanently placed in a location that is visible to the spa user.

  • Page 8: Initial Startup

    Dimension One Spas – @Home Series Owner’s Manual Initial Startup IMPORTANT: About your GFCI Circuit Breaker — The GFCI (Ground Fault Circuit Interrupter — also called a "circuit breaker") is an electrical safety switch that automatically shuts off power to the spa in case of an electrical malfunction.

  • Page 9

    Dimension One Spas – @Home Series Owner’s Manual 7. Remove the two shipping bolts located on the front of the pump mount (circled in illustration). 8. If your spa has a bleeder valve in the skimmer area (see picture at right) remove it to allow air to escape from the pump(s) while you are filling the spa.

  • Page 10

    Dimension One Spas – @Home Series Owner’s Manual function properly. Once the jets are working, be sure to close the bleeder valves (opened when you originally filled the spa) tightly. 12. One minute after the power is turned on, the spa will automatically begin its first one-hour filtration cycle (this cycle may be interrupted if you are turning the Jet pumps on and off at the time, but that’s OK).

  • Page 11: Operation, The Control Panel

    Dimension One Spas – @Home Series Owner’s Manual Operation You control the functions of your spa using the topside Control Panel. Gain a thorough knowledge of the following information before starting up your spa The Control Panel Control Function Display Window The Display Window shows the current status of the hot tub, its monitoring functions, self-diagnostics, or programming messages.

  • Page 12

    Dimension One Spas – @Home Series Owner’s Manual Control Function HEAT Indicator Light This light glows when the heater is on. 5. JETS 1 Button On American models, pushing the JETS 1 Button once starts the pump on LOW speed. Pushing it a second time turns on HIGH speed. Pushing it a third time turns the pump off.

  • Page 13: Programming The Spa Functions

    Dimension One Spas – @Home Series Owner’s Manual Control Function 8.TEMPERATURE Buttons You control the water temperature with the Up (+) and Down (-) Buttons. Push a button once to change the temperature by one degree, or hold it down to rapidly change it by many degrees.

  • Page 14: Control Panel Display Messages

    110° F (43° C). Then reset the power to the spa by resetting the GFCI breaker. If the problem recurs, turn off the power to the hot tub and contact your local Authorized Dimension One Spas...

  • Page 15: Features Unique To Certain Models, Dynamic L.e.d. Light (on Certain Models)

    Dimension One Spas – @Home Series Owner’s Manual Features Unique to Certain Models If your spa is equipped with the Jet Zone Selector, Jet Zone Selector you can rotate this knob on the topside controls to change the flow of water from one group of jets to another.

  • Page 16: Routine Equipment Maintenance, Draining Your Hot Tub, Filter Cleaning, Light Bulb Replacement

    Dimension One Spas – @Home Series Owner’s Manual Routine Equipment Maintenance Draining Your Hot Tub Your spa is gravity-drained, without the need for a pump. To drain the spa, locate the hose bib, which you attached to the spa in the Initial Setup operation, on the base near the lower right side of the equipment panel. Remove the cap (if any) from the hose bib.

  • Page 17: Care For The Hot Tub Surface

    Spas Service Department to have one sent. Be sure the rubber O-ring behind the lens is undamaged and is properly positioned when replacing the lens. Contact Dimension One Spas if you need a replacement O-ring. Care for the Hot Tub Surface We recommend using a “cheesecloth”...

  • Page 18: Special Cold Weather Instructions

    Special Cold Weather Instructions All Dimension One Spas are designed for year-round use. They are insulated for energy efficiency and to protect the plumbing and equipment when the spa is operational. The spa has a freeze protection mode to circulate water during freezing weather, assuming the spa has electrical power and the proper water level.

  • Page 19

    Dimension One Spas – @Home Series Owner’s Manual 12. Remove jet faces and insert the hose of a high-pressure air blower into each jet fitting. Continue this process, until no more water comes out of any jet fitting or drain fitting, and you no longer hear water gurgling within the plumbing.

  • Page 20

    Always check your system after any power failure to ensure that it is operational. Draining and discontinuing the operation of your system disables the freeze protection feature and may result in freeze damage. For more information about winterizing your spa, please contact your local Authorized Dimension One Spas dealer.

  • Page 21: Troubleshooting Guide

    Dimension One Spas – @Home Series Owner’s Manual Troubleshooting Guide Heating System Symptom Problem Corrective Action Does not heat Temperature setting is too Turn up the “set temperature” on the control panel Dirty filter Clean filter. Pressure switch Call your dealer for service.

  • Page 22

    Dimension One Spas – @Home Series Owner’s Manual...

Comments to this Manuals

Symbols: 0
Latest comments: