Setting the picture mode / Screen saver function
There are two types of source content
in pictures recorded in DVD video
discs: film content (pictures recorded
from films at 24 frames per second)
and video content (video signals
recorded at 30 frames per second).
Make this selection according to the
type of content being viewed.
NOTE:
Depending on the disc, pictures may be
cut off or doubled. In this case, select
"Video".
52
5V40701A [En]46-53
Setting the picture mode
1
Press SETUP/TV MENU in the stop
mode or No Disc.
Press
or
2
Press
or ENTER, then press
or
to select "Picture Mode".
3
Press
or
picture mode.
Auto:
Select this position normally.
The DVD player automatically detects
source content, film or video, of playback source.
Film:
Suitable for playback of film content pictures.
Video:
Suitable for playback of video content pictures.
4
Press SETUP/TV MENU or RETURN repeatedly to return to
normal screen.
Screen saver function
With some discs, a menu or similar screen appears when
playback ends. Leaving a fixed display such as a menu on the
screen for an extended period may cause image burn-in on the
TV screen. To prevent this, this TV/DVD is equipped with a
screen saver function. If an image is left continuously on the
screen for approximately 5 minutes, the screen gradually
darkens and then gradually brightens again. This process
repeats until the image is changed.
1
Press SETUP/TV MENU in the
stop mode or No Disc.
Press
or
option.
2
Press
or ENTER, then press
or
to select "Screen
Saver".
3
Press
or
"Off".
4
Press SETUP/TV MENU or RETURN repeatedly to return to
normal screen.
52
to select
option.
/Enter/Setup/Return
TV Screen
Display
Picture Mode
Screen Saver
/Setup/Return
to select your desired
TV Screen
Display
Picture Mode
Screen Saver
/Setup/Return
to select
/Enter/Setup/Return
TV Screen
Display
Picture Mode
Screen Saver
/Setup/Return
to select "On" or
TV Screen
Display
Picture Mode
Screen Saver
/Setup/Return
05`07`06, 09:35
4:3
On
Auto
On
4:3
On
Auto
On
4:3
On
Auto
On
4:3
On
Auto
Off