Tv Operation - Memorex MVDT2002BOM Owner's Manual

NOTES:
• If a channel with no broadcast is
selected, the sound will automatically
be muted.
• If a station being viewed stops
broadcasting, the unit will
automatically shut itself off after 15
minutes.
5V40701A [En]18-21
1
To turn on the unit, press POWER.
2
Adjust the volume level by
pressing VOL + or – . The volume
level will be indicated on the
screen by green bars. As the
volume level increases, so do the
number of bars. If the volume
decreases, the number of green
bars also decreases.
3
Set the TV/CABLE menu
option to the appropriate
position (see page 22).
4
Press the Direct Channel
Selection buttons to select the
channel.
TV Mode Direct Channel
Selection
When the TV/CABLE menu option
is in the TV position, all channels
can be instantly selected by using two buttons. (for example,
to select channel 2, press 0, then 2. If you press only 2,
channel selection will be delayed for a few seconds.) For
channels 10 and above, press the 2 digits in order.
CABLE Mode Direct Channel Selection
When the TV/CABLE menu option is in the CABLE position,
channels can be selected as follows:
1-9: Press 0 twice, then 1-9 as needed. Example, to
select channel 2, press 002.
10-12: Press 0, then the remaining 2 digits. Example, to
select channel 12, press 012.
13-99: Press the 2 digits in order. Example, to select
channel 36, press 36.
100-125: Press the 3 digits in order. Example, to select
channel 120, press 120.
Note for channels 1-12:
If only 1 or 2 buttons are pressed, the corresponding channel
will be selected in 2 seconds.
VHF/UHF/Cable TV channels
TV
VHF
2-13
UHF
14-69
19

TV operation

VOLUME 32
TV - VHF/UHF channels
CABLE - Cable TV channels
+0
Cable TV
VHF
2-13
STD/HRC/IRC
14-36 (A) (W)
37-59 (AA) (WW)
60-85 (AAA) (ZZZ)
86-94 (86) (94)
95-99 (A-5) (A-1)
100-125 (100) (125)
01 (5A)
05`07`06, 09:30
19