Connections To Other Equipment - Memorex MVDT2002BOM Owner's Manual

The exact arrangement you use to interconnect various video and audio components to the unit is dependent
on the model and features of each component. Check the Owner's Manual provided with each component for
the location of video and audio inputs and outputs.
Using an AV Amplifier with built-in digital surround
If you are using an Amplifier with a built-in digital surround sound as follows, you can enjoy the various audio
systems including Dolby Digital Surround audio that sounds just like the movie.
Connect an AV amplifier with built-in Dolby Digital decoder, MPEG decoder or etc as shown below.
Rear of the unit
Coaxial Digital Audio
Output
Coaxial digital cord
(not supplied)
To Coaxial Digital
Audio Input
AV Amplifier with built-in digital surround
decoder as listed above
NOTES:
• When you make the connection above, on the AV Amplifier, do not set DOLBY DIGITAL to DOLBY DIGITAL
"ON". If you do, a loud noise will emit from the speakers possibly causing damage to your hearing or to the
speakers.
• This unit does not apply to DTS audio out. There will be no sound output if connected to AV amplifier with built-
in DTS decoder.
5V40701A [En]12-17

Connections to other equipment

Front
Speaker
(Left)
13
Subwoofer
unit
Center Speaker
Surround Surround
Speaker (Left) Speaker
(Right)
05`07`06, 09:29
Front
Speaker
(Right)
13