Timer Recording - Memorex MVDT2002BOM Owner's Manual

Timer recording can be programmed
on-screen with the remote control.
The built-in timer allows automatic
unattended recording of up to 8
programs within 1 month.
NOTES:
• If the T-Rec indicator blinks when the
timer recording ended, the TV
program has not been completely
recorded because of an insufficient
tape supply. Press TIMER REC to
cancel the timer program or press
EJECT to remove the cassette tape.
• During timer recording standby mode,
the VCR operation cannot be used. To
use the VCR operation, press TIMER
REC to deactivate the timer. After you
use the VCR, press TIMER REC again
to put the VCR into timer recording
standby mode.
• If you press TIMER REC during timer
recording, the recording operation will
be interrupted. If you press TIMER
REC again within the programmed
time, the recording operation will start
again.
• After a power failure or disconnection
of the power plug, all programmed
recording settings and time display will
be lost upon resumption of power. In
this case, reset the clock (see pages
16-18) and reprogram any timer
recordings.
5V40701A [En]36-39
Preparation:
• Press TV/VCR to select the TV/VCR mode.
• Load a cassette tape with the erase prevention tab intact.
• Press DISPLAY/CALL to verify that the time and date are correct
(see page 37).
EXAMPLE: Program a timer recording for the 23rd day, channel
125 (CABLE), 7:00 - 9:30 PM on timer program number 1 (Tape
speed: SLP).
1
Press SETUP/TV MENU. Press
or to select
2
Press or
REC SET", then press
3
Press or
the program line, then press
ENTER.
4
Press or
then press
5
Set the start time, end time,
channel and tape speed as in
step 4, then press ENTER.
NOTES:
• Press to move arrow
backward for correction.
• To record from external source
set the channel to "L" . "L" will
appear next to CH 125 (or 69).
6
To enter other programs, repeat
steps 3-5.
• To return to the normal screen, press SETUP/TV MENU 3 times.
7
Press TIMER REC. The T-Rec indicator will light and the VCR
stands by for recording.
The timer recording will start at 5 seconds before the time you
predetermined.
NOTES:
• If the T-Rec indicator does not light in spite of the pressing of
TIMER REC, the cassette may not have been loaded yet
(see page 32).
• If the cassette is ejected in spite of the pressing of TIMER
REC, the erase prevention tab of the cassette may have
been removed (see page 32).
39

Timer recording

option.
TIMER REC SET
AUTO REPEAT
to select "TIMER
.
TIMER REC SET
AUTO REPEAT
to select one of
– – – – –
– – – – –
– – – – –
– – – – –
– – – – –
– – – – –
– – – – –
– – – – –
to select the date,
.
2 3
– – – – –
– – – – –
– – – – –
– – – – –
– – – – –
– – – – –
– – – – –
05`07`06, 09:34
OFF
/ MENU
/ / /
CH
OFF
/ / / MENU
– : – – – : – – – – – –
– : – – – : – – – – – –
– : – – – : – – – – – –
– : – – – : – – – – – –
– : – – – : – – – – – –
– : – – – : – – – – – –
– : – – – : – – – – – –
– : – – – : – – – – – –
/ / ENTER/MENU
CH
TIMER REC SET
DATE 23(THU)
START 8:30AM
END — — : — —
CH 012
SPEED SP
/ / / / MENU
CH
TIMER REC SET
DATE 23(THU)
START 7 : 00PM
END 9 : 30PM
CH 125
SPEED SLP
/ / / / ENTER/MENU
T H 7 : 0 0PM 9 : 3 0PM 1 2 5 SLP
– : – – – : – – – – – –
– : – – – : – – – – – –
– : – – – : – – – – – –
– : – – – : – – – – – –
– : – – – : – – – – – –
– : – – – : – – – – – –
– : – – – : – – – – – –
/ / ENTER/CANCEL/MENU
39