Preparation; Status Display Of Disc - Memorex MVDT2002BOM Owner's Manual

The following pages describe the
setup/operation in DVD mode.
NOTE:
If the unit does not operate properly:
Static electricity, etc., may affect the
player's operation. Disconnect the AC
power cord once, then connect it again.
5V40701A [En]42-45
Preparation / Status display of disc

Preparation

Before DVD/CD operation, please make preparations as follows.
1
Insert the AC cord plug into a standard 120V 60Hz polarized
AC outlet.
• If the AC cord plug is plugged in for the first time, wait for
about 5 seconds before pressing POWER.
NOTE: When connecting to other equipment, unplug the unit
from the AC outlet.
2
Press POWER on the unit or on the remote control to turn on
the unit. The POWER indicator will light.
• Every time you press POWER, the TV/DVD starts from TV
mode.
• When using an amplifier, switch on the amplifier.
3
Press DVD to select DVD mode.
The DVD startup screen will
appear on the screen.

Status display of disc

Press DISPLAY/CALL. The status display of the disc will appear
on the screen in order like the figure below.
DVD
Play status
Chapter number
Title number
Subtitle language
Audio CD
Disc operation
Track number
• When you play a CD disc, the status display will appear and
remain on the screen.
43
No Disc
Title elapsed playing time
00:03:13 01:30:32
1/2 1/2 00:03:13 01:30:32
T C
Type of audio
1/1 Eng 1/2 Fra D 1/1
Audio language
Display Off
Track elapsed playing time
34:56 71:33
11/99
T
05`07`06, 09:34
Title total time
Camera angle
Track total time
43