Setting The Video Channel; Setting The Language - Memorex MVD4540 Owner's Manual

Setting the video channel / Setting the language

Setting the video channel

To view playback of a recorded tape
or DVD disk, or to watch a program
selected by the VCR's channel
selector, the TV must be set to
channel 3 or 4 (video channel).
OPEN/
POWER EJECT CLOSE
1 2 3
4 5 6
7 8 9
CH
TRACKING/
SET
—
SELECT/
ENTER
CH
SET UP/ CLEAR/
DVD MENU
VCR MENU CANCEL
ZOOM
TITLE
AUDIO/ MEMORY/ ANGLE/
AUDIO SELECT ZERO RETURN COUNTER RESET
SUB TITLE/ PLAY MODE/
TIMER REC
ATR SPEED
REW/SEARCH PLAY
STOP
INDEX/SKIP
REC/OTR SLOW
NOTES:
• If the unit does not operate
properly, or if it does not respond
to commands via the unit and/or
the remote control: Static electric-
ity, etc., may affect the player's opera-
tion. Disconnect the AC power cord
once, then connect it again.
• Both the VCR and the DVD have their
own menu option (See page 36).
• If no buttons are pressed for more
than 60 seconds, the MENU screen
will return to normal TV-operation
automatically.
18
2A77001AE(16-21)
When a TV is connected with the 75 ohm coaxial cable only.
1
Press POWER to turn on the DVD/VCR.
2
Press VCR/DVD to select the VCR mode. The VCR indicator
on the front panel will light.
3
Set the 3/4 Channel selector switch on the rear panel to CH
3 or 4.
VCR/DVD
4
Turn ON the TV and set to CH 3 or 4 to correspond with the
DISPLAY/CALL
channel selected in step 3.
5
Press TV/VCR to select the VCR position.
INPUT SELECT
The VCR indicator will appear in the display.
6
Select any channel to receive a TV station in your area.
0
The channel number will appear on the screen for about
4 seconds.
For a push-button TV tuner
TRACKING/
SET
If CH 3 or 4 corresponding to the video channel cannot be tuned
+
on your TV, proceed as follows: set the VCR 3/4 channel selector
and the TV to CH 3 or 4, play back a prerecorded tape and tune
the TV to receive a sharp color picture from the video cassette
recorder. Refer to your TV owner's manual for details.
RETURN
REPEAT A-B

Setting the language

You can choose from three different languages (English,
CLOCK/
French and Spanish) for the on-screen displays.
COUNTER
1
TV/VCR Press VCR MENU,
If you use the unit for the first time
and press VCR MENU, instead of
SEARCH/F.FWD
the main menu screen on the right
the "SYSTEM SET UP" menu
SKIP/INDEX
screen in step 2 may appear.
PAUSE/STILL
2
Press
"LANGUAGE" option, then press
ENTER.
3
Press
language: English (ENGLISH),
Spanish (ESPAÑOL) or French
(FRANCAIS), then press ENTER.
4
Press VCR MENU until the MENU screen is cleared.
18
or to select the
or to select the desired
8/29/02, 11:02 AM
MENU
TIMER REC SET
ON OFF
AUTO REPEAT
SAP ON OFF
CH SET UP
SYSTEM SET UP
+/-/ENTER/MENU
á ñ