Deleting An Action - Novell SENTINEL LOG MANAGER 1.0.0.5 - ADMINISTRATION GUIDE 03-31-2010 Administration Manual

6 Edit the parameter values for the action.
7 Click Save to save the settings.
If the action settings are changed, a

7.2.3 Deleting an Action

1 Log in to the Sentinel Log Manager as an administrator.
2 Click rules in the upper left corner of the page.
3 The Rules tab is displayed on the right pane of the page.
4 Select the Actions tab.
5 To delete the selected action, click the remove link next to the action
NOTE: The remove link is only enabled if an action is not associated with a rule.
The following confirmation message is displayed.
124 Sentinel Log Manager 1.0.0.4 Administration Guide
Successfully Saved Action
message is displayed.