Enabling Or Disabling Data Archiving; Unmounting Archive Location - Novell SENTINEL LOG MANAGER 1.0.0.5 - ADMINISTRATION GUIDE 03-31-2010 Administration Manual

NOTE: This procedures tests a subset of all of the settings that are necessary for the NFS
server and client.
10 Click Save to configure the specified archive location.

3.2.2 Enabling or Disabling Data Archiving

The enabling and disabling data archiving options appear only when the archive location is
configured. However, event search and reporting work even when the data archiving is disabled.
1 Log in to the Sentinel Log Manager as an administrator.
2 Click the storage link in the upper left corner of the page.
The Storage tab is displayed on the right pane of the page.
3 Click the Configuration tab.
4 To enable writing to archive select Enabled.
You can write both the raw data and event data at the configured archive location. To configure
data archive locations, refer to
5 To disable writing to archive the raw data select Disabled.
This selection disables the writing of raw data and event data archiving.
NOTE: You cannot write to the archive location, but you can still read the archived data.
Search shows the events that are archived, and you can also download the archived raw data.
6 Click Save.

3.2.3 Unmounting Archive Location

Unmount Archive option appears only if the archive location is configured. If the archive is
unmounted, data archiving is disabled. Searches and reports would include only the online data.
1 Log in to the Sentinel Log Manager as an administrator.
2 Click the storage link in the upper left corner of the page.
"Configuring Archive Locations" on page 27.
Configuring Data Storage 31