A Console Commands For Novell Cluster Services; Cluster Management Commands - Novell OPEN ENTERPRISE SERVER 2 SP 2 - CLUSTER SERVICES 1.8.7 FOR LINUX Manual

Console Commands for Novell
A
Cluster Services
®
Novell Cluster Services
related tasks.
Section A.1, "Cluster Management Commands," on page 203
Section A.2, "Business Continuity Clustering Commands," on page 206
Section A.3, "extend_schema Command," on page 206
Section A.4, "SBD Utility," on page 207
A.1 Cluster Management Commands
To execute a cluster console command, enter
you want to display cluster statistics, enter
can also enter
cluster help
functions.
The functions of many of the commands can also be performed using iManager. See the other
sections of this document for additional information.
Table A-1 lists the cluster-related terminal console commands and gives a brief description of each
command.
Cluster Console Commands
Table A-1
Cluster Console Command
ALERT {resource}{YES|NO}
CONVERT {Preview,
Commit}{Resource}
DOWN
EXEC "path_to_script"
provides several console commands to help you perform certain cluster-
TM
cluster
cluster stats display
at the console prompt to get information on the commands and their
Description
The resource start, failover, or failback mode is set to
manual and the resource is waiting to start on a node, or to
fail over or fail back to another node. Specify the resource
name in the command and use the YES or NO switch to
specify whether you want the resource to fail over, fail
back, or start.
Finalizes the cluster conversion from NetWare
after all nodes in a mixed cluster have been converted to
Linux. Specify a resource name with the Preview switch to
view the resource load and unload script changes prior to
finalizing the conversion. Use the Commit switch without
specifying a resource to finalize the conversion for all
cluster resources. The
only be executed on Linux cluster nodes.
Removes all cluster nodes from the cluster. Has the same
effect as executing the
every server in the cluster.
Executes the specified script on all nodes in the cluster.
followed by the command. For example, if
at the terminal console. You
CLUSTER CONVERT
CLUSTER LEAVE
Console Commands for Novell Cluster Services
A
®
to Linux
command can
command on
203