Novell OPEN ENTERPRISE SERVER 2 SP 2 - CLUSTER SERVICES 1.8.7 FOR LINUX Manual page 204

Cluster Console Command
INFO {All, Basic, Notification,
Priority, Protocol, Summary}
JOIN
LEAVE
MAINTENANCE {ON|OFF}
MIGRATE {resource}{node name}
OFFLINE {resource}
ONLINE {resource}{node name}
POOLS
RESOURCES
RESTART {seconds}
204 OES 2 SP2: Novell Cluster Services 1.8.7 for Linux Administration Guide
Description
Displays information on cluster configuration.
All displays a combination of Basic, Notification, Priority,
and Protocol information.
displays IP address, port, and cluster quorum
Basic
settings.
Notification displays cluster e-mail notification
settings.
displays the resource priority list.
Priority
displays the cluster protocol settings.
Protocol
Summary displays the cluster protocol summary.
Adds the node where the command is executed to the
cluster and makes the node visible to other servers in the
cluster. Novell Cluster Services software must already be
installed on a node for it to join the cluster.
Removes the node where the command is executed from
the cluster. The node will not be visible to other servers in
the cluster.
Turning this switch on lets you temporarily suspend the
cluster heartbeat while hardware maintenance is being
performed. This is useful if you want to reset or power
down the LAN switch without bringing the cluster servers
down.
Turning this switch on from one cluster server puts the
entire cluster in maintenance mode.
Migrates the specified resource from the node where it is
currently running to the node you specify in the command.
The node you migrate the resource to must be running in
the cluster and also be in the resource's Assigned Nodes
list.
Unloads the specified resource from the node where it is
currently running.
Starts the specified resource on the most preferred node
that is currently active. You can start the resource on a
different node by specifying that node in the command.
Lists the NSS pools on the shared disk system that are
accessible by Novell Cluster Services.
Lists all resources that currently exist in the cluster. The
resources do not need to be online or running.
Restarts Novell Cluster Services software on all servers in
the cluster.