Novell OPEN ENTERPRISE SERVER 2 SP 2 - CLUSTER SERVICES 1.8.7 FOR LINUX Manual page 76

Give each virtual search server the same name and location. After the first server is set up, any
settings that you create on the shared volume are automatically displayed.
3a On the active cluster node, open the QuickFinder Server Manager.
3b Click Global Settings, then click Add New Virtual Server.
3c In Name, specify the DNS name of the cluster.
3d In Location, specify the Linux path on the Linux POSIX cluster resource where all of the
indexes and virtual search server settings will be located.
3e Click Add.
4 Repeat
Migrating QuickFinder Data from NetWare to Linux
Use the following steps to migrate QuickFinder Server data from a NetWare server to a
corresponding Linux server. You must repeat the tasks for each NetWare server in the cluster. It
assumes a one-to-one server replacement in the cluster.
WARNING: Migrating indexes and virtual search server settings from a QuickFinder Server
running on NetWare to QuickFinder Server running on OES 2 Linux replaces the existing settings
on the Linux server. If you want to merge your NetWare settings with the existing Linux settings,
you must manually re-create the NetWare settings by using the QuickFinder Server Manager.
1 Open a Web browser, the access the QuickFinder Server Manager on the NetWare server.
http://servername/qfsearch/admin
2 Click Global Settings in the top toolbar.
3 Write down the paths for each virtual search server displayed in the Location column.
4 On the OES 2 Linux server where the shared volume is active, mount the NetWare server by
using the
5 Make a backup of the
Make sure that you don't have a file with this name as a backup on the NetWare server.
6 Copy all
NetWare server to
7 Copy
8 Copy
Templates
9 If any of the paths listed in
a virtual search server somewhere other than the default location), you must also copy those
paths to Linux.
For example, if you have the path
Linux server. You could copy it to
qfsearch/Sites/PartnerSite
10 Edit all NetWare paths in
Linux paths.
For example, change
76 OES 2 SP2: Novell Cluster Services 1.8.7 for Linux Administration Guide
Step 1 to Step 3 for each of the nodes in the cluster.
command.
ncpmount
/var/lib/qfsearch/SiteList.properties
and
.properties Cron.jobs
/var/lib/qfsearch
sys:/qfsearch/Sites
sys:/qfsearch/Templates
.
Step 3
/var/lib/qfsearch/SiteList.properties
sys:/qfsearch
files from the root directory
on the Linux server.
and all of its subdirectories to
and all of its subdirectories to
are not under
sys:/qfsearch
sys:/SearchSites/PartnerSite,
/var/opt/SearchSites/PartnerSite
.
to
/var/lib/qfsearch.
file.
on the
sys:/qfsearch
/var/lib/qfsearch/Sites
/var/lib/qfsearch/
(for example, if you installed
you must copy it to the
or
/var/lib/
to reflect the new
.