Novell OPEN ENTERPRISE SERVER 2 SP 2 - CLUSTER SERVICES 1.8.7 FOR LINUX Manual page 148

9 If you are enabling the resource for Novell CIFS, do the following:
9a On the Protocols page, specify the following parameters, then click Apply.
A default name (up to 15 characters) is suggested for the CIFS Virtual Server Name when
you first add the advertising protocol. You can modify the default name only at create
time.
After you have applied this setting, the CIFS share is created with the name you specified.
Thereafter, you cannot use this interface to change the CIFS Virtual Server Name. Use the
CIFS plug-in for iManager to manage the CIFS share name of an existing share. For
information, see
documentation/oes2/file_cifs_lx/data/bdkfk5j.html#af3ozzn)
CIFS for Linux Administration
9b Run the
IMPORTANT: In OES 2 SP1 Linux, the Novell CIFS commands are not automatically
added to the load and unload scripts for the NSS pool resource when you add Novell CIFS
as an advertising protocol on an existing cluster-enabled pool. You must run the
cifsPool.py
You can download the
(http://download.novell.com/Download?buildid=sA5Tdb_U2CE~).
At a terminal console prompt, log in as the
python cifsPool.py pool_resource_DN cifs_servername ldaps://
ldap_server_ip:636 admin_DN admin_password
For example, enter
python cifsPool.py cn=CLUS1_POOL1_SERVER,cn=clus1,o=company CIFS_POOL
ldaps://10.10.10.1:636 cn=admin,o=company pa$$w0rD
where the values are:
Parameter
pool_resource_DN
cifs_servername (up to 15
characters)
ldap_server_ip
admin_DN
admin_password
10 Online the cluster resource.
For information, see
Resources from a Cluster Node," on page
148 OES 2 SP2: Novell Cluster Services 1.8.7 for Linux Administration Guide
CIFS Virtual Server Name (up to 15 characters)
CIFS check box
"Setting CIFS General Server Parameters" (http://www.novell.com/
script to modify the load and unload scripts.
cifsPool.py
script to add commands for Novell CIFS.
cifsPool.py
Sample Value
cn=CLUS1_POOL1_SERVER,cn=clus1,o=company
NOTE: The cluster container is stored in eDirectory as a CN
and not an OU.
CIFS_POOL1
10.10.10.1
cn=admin,o=company
pa$$w0rD
Section 8.5, "Onlining and Offlining (Loading and Unloading) Cluster
Guide.
script file as a patch
user, then enter
root
102.
in the OES 2 SP2: Novell
Novell Downloads Web site