Novell ADMINSTUDIO 9.5 User Manual page 1741

Table 22-54 • AMS_AuditTrail Table Column Information (cont.)
Column
ApplicationID
IssueID
ChangedDate
ChangedBy
OldValue
NewValue
IterationCount
Comment
AdminStudio 9.5 User Guide
Description
This column stores the ID of the Application for which the Audit information was created.
This ID can be used as join in AMS_Application table which will give information about
the Application for the issue.
This column stores the ID of the Issue for which the Audit information was created, if any
related issue was also created for the same audit. This ID can be used as join in
AMS_Issues table which will give information about the issue.
This column stores the date and time (format:
audit was created.
This column stores the ID for the User whose actions created the audit. This ID is
AMS_Person table primary key; hence this ID can be used as join in AMS_Person table
to get more information about the user.
This column stores the old data information of a data item of the active application
Workflow, whose value is changed.
This column stores the new data information of a data item of the active application
Workflow, whose value is changed.
This gives the number of iteration an active application Workflow has been through. The
value starts from 1 and increases with each rollback of the active application.
This column stores any comments for the audit (either system generated or entered by
user).
ADS-0950-UG00
Chapter 22: Generating and Viewing Reports in Report Center
MM/DD/YYYY
Report Center Reference
) when the
HH:MM:SS AM/PM
1741