Ams_Application Table - Novell ADMINSTUDIO 9.5 User Manual

AMS_Application Table

This table stores the information about the Application Requests created in Workflow Manager. Some of the
columns that can help you retrieve information are listed in the following table.
Table 22-48 • AMS_Application Table Column Information
Column
ApplicationID
ApplicationLName
ContractID
UploadDate
UploadBy
DueDate
StatusSummary
CurrentWFMajorItemID
CurrentWFMinorItemID
AdminStudio 9.5 User Guide
Description
Primary Key of this table.
This column stores the name of the Application Request created by Customer or
Servicer.
Each Application is tied with a Project. This column stores the Project ID of the
Project with which this application is tied with. More Information about this
Project can be found from AMS_Contracts table using this Project ID.
This column stores the date and time when this Application Request was
created.
This column stores the Person ID of the user who created this Application
Request. More information about this user can be found from AMS_Person
table using this Person ID.
This column stores the Date & Time by which this application should be
completed.
This column show the status of this Application Request. Following table show
the status of the application based on the value in this column.
•
0—Data Entry Phase
•
10—Workflow Phase
•
20—Acceptance Phase
•
30—Final Phase
• 90—Completed
•
40—AdminStudio Step
• 1010—Merge Workflow Step (used internally)
The value in this column indicates which Workflow Phase is currently being
executed for this Application Request. User can find further information about
this Workflow Phase from ams_wfmajorItemtpl table.
The value in this column indicates which Workflow Step is being executed for
this Application Request. User can find further information about this Workflow
Step from ams_wfminorItemTpl table.
ADS-0950-UG00
Chapter 22: Generating and Viewing Reports in Report Center
Report Center Reference
1735