Novell ADMINSTUDIO 9.5 User Manual page 1739

Table 22-53 • AMS_Issues Table Column Information (cont.)
Column
IssueText
IssueType
Status
ApplicationID
CreatedBy
CreateDate
ReadBy
AdminStudio 9.5 User Guide
Description
This stores the detail information about the issue.
This is an integer value which stores the type of the issue. An issue can be of various
types as follows:
User Created Issues
•
1—Issue is only shared between Service Company users.
• 2—General type of issue for Customers.
•
3—General type of issue for Servicers.
• 7—When user responds to any issue, a new issue is created of this issue type.
•
8—Critical Issue: This will block the Workflow progress and requires special
permission to create or close it.
System Generated Issues
There are also some system generated issues. They are as follows:
•
4—When Update History step is completed in Workflow.
• 5—When Data submitted is rejected by the Service Company user.
•
6—When any Workflow Step is rolled back.
This column stores the status of the issue as integer values , they are as follows:
• 0—New Created Issue which are not read.
•
1—Issue is already read.
• 2—Issue is already responded.
•
3—Issue is closed.
This column stores the ID of the Application for which the issue is created. This ID can be
used as join in AMS_Application table which will give information about the Application
for the issue.
This column stores the ID for the User who has created the issue. This ID is
AMS_Person table primary key; hence this ID can be used as join in AMS_Person
table to get more information about the user who created the issue.
This column stores the date and time (format: MM/DD/YYYY HH:MM:SS AM/PM) when
the issue was created.
This column stores the ID for the User who has read the issue last (most current). This ID
is AMS_Person table primary key; hence this ID can be used as join in AMS_Person
table to get more information about the user who read the issue.
ADS-0950-UG00
Chapter 22: Generating and Viewing Reports in Report Center
Report Center Reference
1739