Table of Contents
Advertisement
4. Install PlateSpin Orchestrate Server packages on this node. Use the steps as described in
"Installing the Orchestrate Server YaST Patterns on the Node" on page
NOTE: Do not run the initial configuration script (
than the primary node.
5. Copy the license file (
server/license/
6. Run the high availability configuration script on this node, as described in
Availability Configuration Script" on page
the SAN.
1.2.8 Creating the Cluster Resource Group
The resource group creation script,
novell/zenworks/orch/bin
node of the cluster to set up the cluster resource group. If you want to set up the resource group
using Heartbeat 2 (GUI console or command line tool), running the script is optional.
The script performs the following functions:
Obtains the DNS name from the PlateSpin Orchestrate configuration file.
Creates the cluster resource group.
Configures resource stickiness to avoid unnecessary failbacks.
The
zos_server_ha_resource_group
Server cluster. The script then adds this address to a Heartbeat 2 Cluster Information Base (CIB)
XML template called
cluster_zos_server.xml
cluster resource group:
/usr/sbin/cibadmin -o resources -C -x $XMLFILE
The CIB XML template is located at
cluster_zos_server.xml
<group id="ZOS_Server">
<primitive id="ZOS_Server_Cluster_IP" class="ocf" type="IPaddr2"
provider="heartbeat">
<instance_attributes>
<attributes>
<nvpair name="ip" value="$CONFIG_ZOS_SERVER_CLUSTER_IP"/>
</attributes>
</instance_attributes>
</primitive>
<primitive id="ZOS_Server_Instance" class="lsb" type="novell-zosserver"
provider="heartbeat">
<instance_attributes id="zos_server_instance_attrs">
<attributes>
<nvpair id="zos_server_target_role" name="target_role"
value="started"/>
</attributes>
</instance_attributes>
<operations>
<op id="ZOS_Server_Status" name="status" description="Monitor the
status of the ZOS service" interval="60" timeout="15" start_delay="15"
) from the first node to the
key.txt
directory on this node.
28. This creates the symbolic link to the file paths of
zos_server_ha_resource_group
with the other configuration tools. You can run this script on the first
script prompts you for the IP address of the Orchestrate
/opt/novell/zenworks/orch/bin/ha/
. An unaltered template sample is shown below:
Preparing PlateSpin Orchestrate for High Availability Support
or
config
guiconfig
/opt/novell/zenworks/zos/
, is located in
and uses the following command to create the
15.
) on any other node
"Running the High
/opt/
29
Advertisement
Table of Contents
