Configuring The Ip Address, Port, And Nat; Configuring The Ssl Vpn Gateway Behind Nat Or L4 - Novell ACCESS MANAGER 3.1 SP1 - SSL VPN SERVER GUIDE 03-17-2010 Manual

Configuring the IP Address, Port,
1 1
and NAT
The Gateway Configuration page displays the current configuration of the SSL VPN server, such as
the external IP address if the SSL VPN server is behind NAT, the listening IP address, TCP
encryption port, connection manager port, and the type of encryption used.
This section describes how to configure the IP addresses, port, subnet address and subnet mask, and
protocol for SSL VPN.
Section 11.1, "Configuring the SSL VPN Gateway Behind NAT or L4," on page 75
Section 11.2, "Configuring the SSL VPN Gateway Without NAT or L4," on page 77
11.1 Configuring the SSL VPN Gateway Behind
NAT or L4
To configure SSL VPN behind NAT (Network Address Translation) or by using an L4 server:
1 In the Administration Console, click Devices > SSL VPNs > Edit.
The Server configuration page is displayed.
2 Select Basic Configuration from the Gateway Configuration section.
The SSL VPN Basic Configuration page is displayed.

Configuring the IP Address, Port, and NAT

11
75