Configuring The Ip Address, Port, And Network Address Translation (Nat) - Novell ACCESS MANAGER 3.1 SP2 - SSL VPN SERVER GUIDE 2010 Manual

10 Click the Web Servers tab.
11 Specify 8080 in the Connect Port field, then click OK.
12 In the Proxy Service List section, click the name of the parent proxy service of the newly
created SSL VPN proxy service. This host does not have a multi-homing value.
13 Select the Protected Resources tab.
14 Select SSLVPN_Default from Protected Resources List.
15 Select an authentication contract from the Authentication Procedure drop-down list.
The user is assigned the timeout value of the contract used for authentication, and not the
default timeout value.
16 In the URL Path List section, ensure that the URL is /sslvpn/*.
IMPORTANT: Make sure that you configure the URL as given above. Any variation leads to
the failure of SSL VPN service.
17 Click Configuration Panel, then click OK.
18 On the Configuration page, click OK.
19 On the Access Gateways page, click Update.
20 To update the Identity Server, click Identity Servers > Update.
21 Click Close.
22 (Optional) If you have not already configured the SSL VPN server details, proceed with
Section 2.3, "Configuring the IP Address, Port, and Network Address Translation (NAT)," on
page 27.
2.3 Configuring the IP Address, Port, and
Network Address Translation (NAT)
The Gateway Configuration page displays the current configuration of the SSL VPN server, such as
the external IP address if the SSL VPN server is behind NAT, the listening IP address, TCP
encryption port, Connection Manager port, and the type of encryption used.
Basic Configuration for SSL VPN 27