Advanced Menu - Intel AN430TX - Motherboard - ATX Technical Product Specification

3.2.3.10 Ultra DMA
Sets the Ultra DMA mode for the hard disk drive. The options are:
Disabled (default)
Mode 0
Mode 1
Mode 2

3.2.4 Advanced Menu

3.2.4.1 Plug & Play O/S
Select Yes if a Plug and Play operating system is being used. The options are:
No
Yes (default)
3.2.4.2 Reset Configuration Data
Used to clear the computer's configuration data. The options are:
No (default)
Yes
3.2.4.3 Memory Cache
The options are:
Disabled
Enabled (default)
3.2.4.4 Memory Bank 0
This status field reports the size and type of memory module in bank 0. There are no options.
3.2.4.5 Memory Bank 1
This status field reports the size and type of memory module in bank 1. There are no options.
3.2.4.6 Resource Configuration Submenu
3.2.4.6.1 Memory Reservation
Reserves specific upper memory blocks for use by legacy ISA devices. The options are:
D000 - D3FF
D400 - D7FF
D800 - DBFF
DC00 - DFFF
Memory hole
Available (default) | Reserved
Available (default) | Reserved
Available (default) | Reserved
Available (default) | Reserved
Disabled (default) | Conventional | Extended
BIOS and Setup Program
63