Primary/Secondary Ide Master/Slave Configuration Submenus - Intel AN430TX - Motherboard - ATX Technical Product Specification

3.2.2.10 Primary IDE Master
Reports size of a connected IDE device. When selected, this displays the device configuration
subscreen for the Primary IDE master interface.
3.2.2.11 Primary IDE Slave
Reports size of a connected IDE device. When selected, this displays the device configuration
subscreen for the Primary IDE slave interface.
3.2.2.12 Secondary IDE Master
Reports size of a connected IDE device. When selected, this displays the device configuration
subscreen for the Secondary IDE master interface.
3.2.2.13 Secondary IDE Slave
Reports size of a connected IDE device. When selected, this displays the device configuration
subscreen for the Secondary IDE slave interface.

3.2.3 Primary/Secondary IDE Master/Slave Configuration Submenus

Used to manually configure the hard drive or have the computer automatically configure it.
3.2.3.1 Type
Selects the drive type that corresponds to the drive installed in your system. If set to User, the
number of Cylinders, Heads, and Sectors can be modified. The options are:
None
ATAPI Removable
IDE Removable
CD-ROM
User
Auto (default)
3.2.3.2 Cylinders
If device configuration is set to Auto, this field reports the number of cylinders for your hard disk
and cannot be modified. If IDE Device Configuration is set to User Definable, you must type the
correct number of cylinders for your hard disk.
3.2.3.3 Heads
If device configuration is set to Auto, this field reports the number of heads for your hard disk and
cannot be modified. If IDE Device Configuration is set to User Definable, you must type the
correct number of heads for your hard disk.
BIOS and Setup Program
61