Installing Your Router Manually (Advanced, Mac, And Linux Users) - NETGEAR DGN2200v1 Setup Manual

Before installing and connecting your router manually, review the list below and make sure that
you have all of the necessary information.
• Internet ADSL service connection through an Internet Service Provider (ISP).
• The configuration information your ISP gave you. Depending on how your Internet account
was set up, you may need the following information to set up your wireless-N modem router
and access the Internet:
– Host and Domain Name
– Internet Login Name and Password (frequently an email address and password)
– Domain Name Server (DNS) Addresses
– Fixed or Static IP Address
Your ISP should have provided you with all the information needed to connect to the Internet.
If you cannot locate this information, ask your ISP.
• ADSL Microfilters (see
• Your computers set to DHCP enabled.
If you have not already done so:
• Check the package contents of your router to ensure that it is complete (see
New Router" on page
• Select an optimum location for your wireless-N modem router after reviewing the guidelines
presented in "Positioning Your Wireless Router" on page

Installing Your Router Manually (Advanced, Mac, and Linux Users)

Installing Your Router Manually
(Advanced, Mac, and Linux Users)
"Understanding ADSL Microfilters" on page
1").
-13).
"Unpacking Your
6."
12