Buttons And Keys - Diamondback RESPONSE PM4360 Owner's Manual

Buttons and Keys

RESET
The reset button will return the programming to the program selection menu.
Holding the RESET key down for two seconds restarts the system and enters the User Set-Up mode.
START / QUICK START / STOP
When powering up the unit, it is possible to bypass all data entry and enter the Quick Start
program.
Pressing START / QUICK START / STOP while in the Program Set-Up mode will immediately
launch the program displayed in the Alpha-Numeric Messaging Bar.
Pressing START / QUICK START / STOP key once while in Program mode will pause the program.
Pressing the key again will un-pause the program.
UP / DOWN
During the Program Set-Up mode, press UP or DOWN to adjust the Age, Weight and Time values.
During the Program mode, press UP or DOWN to adjust the resistance level.
ENTER
Within the Set-Up mode, the ENTER key accepts the current program details such as Age and
Weight then moves to the next value to be adjusted.
In Program Selection mode, pressing ENTER will accept the displayed program and launch
Set Up mode.
19