Cisco WCM300 - Channel Bonded Cable Modem Implementation Manual page 69

Chapter 5 Monitoring and Troubleshooting Wideband Components
Bundle num—The number of the virtual bundle interface in which the wideband channel is a
•
member.
WB Host Slot/Subslot—The cable interface line card that has been configured for Wideband
•
protocol operations. For information, see the modular-host subslot command in the Cisco
uBR10012 Universal Broadband Router SIP and SPA Software Confirguration Guide.
Primary BG—Yes indicates that the wideband channel is a primary bonding group (primary
•
wideband channel).
To display wideband-channel statistics, use show hw-module bay with the counters and
wideband-channel keywords.
Router#show hw-module bay 1/0/0 counters wideband-channel 0
SPA
1/0/0
To display RF-channels that have been configured for a wideband channel, use show hw-module bay
with the mapping and wideband-channel keywords. The BW % column is the percent of the RF
channel's bandwidth that is assigned to the wideband channel with the cable rf-channel command.
Router# show hw-module bay 1/0/0 mapping wideband-channel
SPA
1/0/0
1/0/0
1/0/0
1/0/0
1/0/0
1/0/0
1/0/0
1/0/0
1/0/0
1/0/0
1/0/0
1/0/0
OL-10705-02
WB channel Tx packets
0 29069
WB RF BW %
channel channel
0 0 100
1 100
1 2 100
3 100
2 4 100
5 100
3 6 100
7 100
4 8 100
9 100
5 10 100
11 100
6 12 100
13 100
7 14 100
15 100
8 16 100
17 100
9 18 100
19 100
10 20 100
21 100
11 22 100
23 100
Cisco Cable Wideband Solution Design and Implementation Guide, Release 1.0
Monitoring Wideband Components
Tx octets
4032392
5-9