Kickstand - Fishman LOUDBOX PERFORMER - ANNEXE 324 Owner's Manual

Power Switch
Lower the master volume or engage the Mute switch before you turn on the amp.
Flip the power switch to the right and it will light, indicating the amp is on.
AC Power
For 120V amplifiers purchased in the USA, Canada and Mexico, plug in the
supplied detachable AC power cable.
For 230V amplifiers purchased outside the USA and Canada, you will need to
supply your own detachable AC cable. This cable must have an IEC-style 320
connector at one end, and a male AC plug appropriate for your region at the
other.
Fuse Holder
The fuse is located within the AC power receptacle on the back of the amp.
Access the fuse compartment with a small slotted screwdriver.
For 120V amplifiers purchased in the USA and Canada, replace the fuse with:
LittelFuse type 218002 or equivalent 5 x 20 mm, 2A, 250V, time-delay fuse.
®
For 230V amplifiers purchased outside the USA and Canada, replace the fuse
with: LittelFuse type 218001 or equivalent 5 x 20 mm, 1A, 250V, time-delay
®
fuse.

Kickstand

To hear yourself better onstage, use
the kickstand to angle the Loudbox
Performer back like a wedge-style
floor monitor. The kickstand tilts
the cabinet back 45-degrees.
Swing the kickstand up and away
from the amp until it stops. Gently
tilt the Loudbox Performer back
onto the kickstand.
Warning: Do not pick the amp up by the kickstand!
For safe operation, use the kickstand only on solid, level ground.
Do not permit the kickstand to rest on the AC power cord.
Owner's Manual
9
Power
12 0 V 2 30 V
120V / 230 - 240V ~ AC
5 0 / 60H z - 5 00W M ax
FU S E: 120V T2AL / 230V T1A L
Re p lace with same ty p e fuse as indicate d
Fuse Holder