Install Memory - JETWAY I401R5A User Manual

2-4 Install Memory

This motherboard provides
(DIMM) sites for memory expansion available from minimum memory size of
64MB to maximum memory size of 3.0GB SDR SDRAM.
Valid Memory Configurations
Bank
Bank 0, 1 (DIMM1)
Bank 2, 3 (DIMM2)
Bank 4, 5 (DIMM3)
Total
NOTE! Make sure the installed memory are PC133 SDRAM support 133MHz memory
clock, otherwise the system may hang during startup.
Generally, installing SDR SDRAM modules to your motherboard is very easy, you
can refer to figure 2-4 to see what a 168-Pin PC133 SDR SDRAM module looks
like.
NOTE! When you install DIMM module fully into the DIMM socket the eject tab
should be locked into the DIMM module very firmly and fit into its
indention on both sides.
three 168-pin DUAL INLINE MEMORY MODULES
168-Pin DIMM
PC133 SDR SDRAM Module
PC133 SDR SDRAM Module
PC133 SDR SDRAM Module
System Memory (Max. 3.0GB)
11
Total Memory
X1 64MB∼1.0GB
X1 64MB∼1.0GB
X1 64MB∼1.0GB
3 64MB∼3.0GB
Figure 2-4