Table of Contents
Advertisement
Typematic Rate Setting
Keystrokes repeat at a rate determined by the keyboard controller. When enabled, the
typematic rate and typematic delay can be selected. The settings are: Enabled/Disabled.
Typematic Rate (Chars/Sec)
Sets the number of times a second to repeat a keystroke when you hold the key down. The
settings are: 6, 8, 10, 12, 15, 20, 24, and 30.
Typematic Delay (Msec)
Sets the delay time after the key is held down before is begins to repeat the keystroke. The
settings are 250, 500, 750, and 1000.
Security Option
This category allows you to limit access to the system and Setup, or just to Setup.
System
Setup (default) The system will boot, but access to Setup will be denied if the correct
Small Logo (EPA) Show
The selection is for you to choose the EPA small logo to show or not.
3-6 Advanced Chipset Features
The Advanced Chipset Features Setup option is used to change the values of the chipset
registers. These registers control most of the system options in the computer.
> Hyper Transport Frequency
> Hyper Transport Width
> DRAM Timing Settings
> System BIOS Cacheable
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
HperTransport Frequency
The default setting is "Auto" for this selection, and it provides with the frequency from 200 to
1000MHz for you to select manually. The AMD Athlon64 FX processor supports 1GHz
HyperTransport bus to access. We recommend you to use the frequency for both performance
and reliabilities of your system.
The system will not boot and access to Setup will be denied if the
correct password is not entered at the prompt.
password is not entered prompt.
Phoenix – AwardBIOS CMOS Setup Utility
Advanced Chipset Features
Auto
Auto
Press Enter
Enabled
F6:Optimized Defaults
Menu Level >
F7:Standard Defaults
26
Item Help
F1:General Help
Advertisement
Table of Contents
