How To Update Bios; Nforce4 Platform Raid Function Installation - JETWAY 939GT4SLIR311 User Manual

4-7 HOW TO UPDATE BIOS

Before updating the BIOS, users have to "Disable" the "Flash Part Write Protect" selection in
"Miscellaneous Control" of BIOS SETUP. Otherwise the system the will not allow you to
upgrade BIOS by Award Flash Utility.
STEP 1. Prepare a boot disc. (you may make one by click START click RUN type SYS A:
click OK)
STEP 2. Copy utility program to your boot disc. You may copy from DRIVER CD
X:\FLASH\AWDFLASH.EXE or download from our web site.
STEP 3. Download and make a copy of the latest BIOS for 939GT4-SLI-D/ 939GT4-SLI-G/
939GT4-SLI-P motherboard series from the web site to your boot disc.
STEP 4. Insert your boot disc into A:,
start the computer, type "Awdflash A:\939GT4xxx.BIN /SN/PY/CC/R"
939GT4xxx.BIN is the file name of latest BIOS it can be 939GT403.BIN or
939GT402.BIN
SN means don't save existing BIOS data
PY means renew existing BIOS data
CC means clear existing CMOS data
R means restart computer
STEP 5. Push ENTER to update and flash the BIOS, then the system will restart
automatically.

4-8 Nforce4 Platform RAID Function Installation

Step 1.
Please get into the location: BIOS setup \ Integrated Peripherals \ Onchip IDE function \
RAID Configuration to enable the RAID function and choose the RAID hard drive channel.
RAID Enable
IDE Primary Master
IDE Primary Slave
IDE Secondary Master RAID
IDE Secondary Slave
SATA Channel 1
SATA Channel 2
SATA Channel 3
SATA Channel 4
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Phoenix – AwardBIOS CMOS Setup Utility
RAID Configuration
Enabled
RAID Disabled
RAID Disabled
Disabled
RAID Disabled
Enabled
RAID
Enabled
RAID
Enabled
RAID
Enabled
RAID
F6:Optimized Defaults
Menu Level >>
F7:Standard Defaults
47
Item Help
F1:General Help