Install Memory - JETWAY 939GT4SLIR311 User Manual

2-4 Install Memory

This motherboard provides
(DIMM) sites for DDR memory expansion available from minimum memory size of 128MB
to maximum memory size of 4.0GB DDR SDRAM.
Valid Memory Configurations
Bank
Bank 0, 1 (DIMM1)
Bank 2, 3 (DIMM2)
Bank 4, 5 (DIMM3)
Bank 6,7 (DIMM4)
Total
Recommend DIMM Module Combination
1. One DIMM Module ----Plug in DIMM1
2. Two DIMM Modules---Plug in DIMM1 and DIMM3 for Dual channel function
3. Four DIMM Modules---Plug in DIMM1/DIMM2/DIMM3/DIMM4.
For Dual channel Limited!
4. Dual channel function only supports when 2 DIMM Modules plug in either both DIMM1 &
DIMM3 or DIMM2 &DIMM4, or four DIMM Modules plug in DIMM1~DIMM4.
5. DIMM1 & DIMM3, or DIMM2 & DIMM4 must be the same type, same size, same frequency
for dual channel function.
Generally, installing DDR SDRAM modules to your motherboard is very easy, you can refer
to figure 2-4 to see what a 184-Pin DDR266/DDR333/DDR400 DDR SDRAM module looks
like.
When you install DIMM module fully into the DIMM socket the eject tab
NOTE!
should be locked into the DIMM module very firmly and fit into its
indention on both sides.
four 184-pin DDR DUAL INLINE MEMORY MODULES
184-Pin DIMM
DDR266/DDR333/DDR400
DDR266/DDR333/DDR400
DDR266/DDR333/DDR400
DDR266/DDR333/DDR400
System Memory (Max. 4.0GB)
DIMM1 & DIMM3: Dual Channel 1
DIMM2 & DIMM4: Dual Channel 2
PCS
10
Total Memory
X1
128MB 1.0GB
X1
128MB 1.0GB
X1
128MB 1.0GB
X1
128MB 1.0GB
4
128MB 4.0GB
Figure 2-4