Table of Contents
Advertisement
Typematic Rate Setting
Keystrokes repeat at a rate determined by the keyboard controller. When enabled, the
typematic rate and typematic delay can be selected. The settings are: Enabled/Disabled.
Typematic Rate (Chars/Sec)
Sets the number of times a second to repeat a keystroke when you hold the key down. The
settings are: 6, 8, 10, 12, 15, 20, 24, and 30.
Typematic Delay (Msec)
Sets the delay time after the key is held down before is begins to repeat the keystroke. The
settings are 250, 500, 750, and 1000.
Security Option
This category allows you to limit access to the system and Setup, or just to Setup.
System
Setup (default) The system will boot, but access to Setup will be denied if the correct
OS Select For DRAM > 64MB
Allows OS2 ® to be used with >64MB or DRAM. Settings are Non-OS/2 (default) and OS2.
Set to OS/2 if using more than 64MB and running OS/2.
3-6 Advanced Chipset Features
The Advanced Chipset Features Setup option is used to change the values of the chipset
registers. These registers control most of the system options in the computer.
DRAM Timing Settings
SDRAM CAS Latency Time
SDRAM Cycle Time
SDRAM RAS-to CAS Delay
SDRAM RAS Precharge Time
System BIOS Cacheable
Video BIOS Cacheable
Memory Hole at 15M-16M
> PCIExpress Root Port Function Press Enter
** VGA Setting **
PEG/Onchip VGA Control
PEG Force X1
On-Chip Frame Buffer Size
FIXED Memory Size
DVMT Memory Size
↑ ↓ → ←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
The system will not boot and access to Setup will be denied if the
correct password is not entered at the prompt.
password is not entered prompt.
Phoenix – AwardBIOS CMOS Setup Utility
Advanced Chipset Features
By SPD
Auto
Auto
Auto
Auto
Enabled
Enabled
Disabled
Auto
Disabled
32MB
64MB
64MB
F6:Optimized Defaults
Menu Level >
F7:Standard Defaults
34
Item Help
F1:General Help
Advertisement
Table of Contents
