Miscellaneous Control - JETWAY 740DMR1A User Manual

Detect CPUFAN in Post
Current System Temperature
Current CPU Temperature
Current CPUFAN Speed
Current SYSFAN Speed
Vcore
Vcc3.3
+ 5V
+12V
-12V
VBAT(V)
5VSB(V)
↑ ↓ → ← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Shutdown Temperature
This item can let users setting the Shutdown temperature, when CPU temperature over this
setting the system will auto shutdown to protect CPU.
Show PC Health in Post
During Enabled, it displays information list below. The choice is either Enabled or Disabled
Current CPU Temperature/Current System Temp/Current FAN1, FAN2 Speed/Vcore/
Vdd/3.3V/+5V/+12V/-12V/VBAT(V)/5VSB(V)
This will show the CPU/FAN/System voltage chart and FAN Speed.
Detect CPUFAN in Post
During Enabled, system will warn the user if CPU Fan is not functioning.

3-11 Miscellaneous Control

This section is for setting CPU Frequency/Voltage Control.
CMOS Setup Utility – Copyright(C) 1984-2002 Award Software
Auto Detect DIMM/PCI Clk
Spread Spectrum
Clock Control
** Current Host Clock is
Host Clock at Next Boot is
** Current DRAM Clock is
DRAM Clock at next Boot is
↑ ↓ → ← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Auto Detect DIMM/PCI Clk
This item allows you to enable/disable auto detect DIMM/PCI Clock.
Spread Spectrum
This item allows you to set the CPU Host/PCI clock and Spread Spectrum.
Enabled
25 ° C
38 ° C
5000 rpm
5000 rpm
1.78V
3.31V
4.98V
12.22V
-12.36V
3.21V
5.02V
F6:Optimized Defaults
Miscellaneous Control
Enabled
Disabled
133MHz
133MHz
133MHz
133MHz
133MHz
F6:Optimized Defaults
33
Menu Level >
F1:General Help
F7:Standard Defaults
Item Help
Menu Level >
F1:General Help
F7:Standard Defaults