The Options - Asko T701 Use And Care Manual

The Temperature Menu
This menu lets you select a Normal or Low temperature.
Only the temperatures available for the dry program
you selected will display.
1. Press MENU until "Select temperature" displays.
2. Use the Arrow buttons to toggle between the
Normal and Low temperature settings.
3. When the setting you prefer displays, press ENTER.
The LCD will display the new temperature setting.
4. Press ENTER again to permanently save your
program setting.
The Delayed Start Program
This program lets you delay starting the dryer for up to
24 hours. This feature is useful in areas where utility
companies offer discount rates during off-peak hours.
When you select Delayed Start on the program menu,
you must select a delay time (1 to 24 hours).
1. Press MENU until "Select time for delayed start"
displays.
2. In the bottom right corner of the LCD window, a
clockface and a zero will flash. To change the zero,
simply press an Arrow button until the LCD displays
the number of hours you want to delay starting the
program (1–24 hours).
3. Press ENTER to program your change.
4. Press ENTER again to permanently save your
program setting.
When you press START, the clockface and the hours
you set for the delay will display, as illustrated below:

The Options

This lets you select Buzzer, Anti-crease, and Normal or
Quick Cooling. Only the options available with the
program you selected will display. (See tables on page
14.)
1. Press MENU until "Select Options" displays.
2. Continue to press MENU to scroll through the options.
Page 16
3. Press an Arrow button to toggle between Off and On
4. When the setting you prefer displays, press ENTER.
The LCD will display the new setting.
5. Press ENTER again to permanently save your
program setting.
RESTORING A PRESET RESTORING A PRESET RESTORING A PRESET
RESTORING A PRESET RESTORING A PRESET
PROGRAM PROGRAM PROGRAM
PROGRAM PROGRAM
To restore a preset program to its original settings,
simply press the button (P1–P4) for the preset program
you want to restore and hold it down while your press
ENTER . The program will revert to its original settings.
CHANGING THE LANGU CHANGING CHANGING CHANGING CHANGING THE LANGU THE LANGU THE LANGU THE LANGUA A A A A GE
ON ON ON ON THE L ON THE L THE LCD DISPLA THE L THE L CD DISPLA CD DISPLA CD DISPLAY Y Y Y Y CD DISPLA
There are eleven languages available for the LCD
window:
English
French
Spanish
Portuguese
Italian
German
To change the language, follow the steps below:
1. Turn the machine off then on again.
2. Press ENTER ENTER five times in succession then press ENTER ENTER ENTER
P1 five times. (This must be done within 15 seconds.)
3. When the Language menu displays, press an Arrow
button to advance through the menu to the desired
language.
4. Once the correct language displays, press ENTER
to program the LCD window to display the language
you selected.
CHILD-SAFE ST CHILD-SAFE ST CHILD-SAFE STAR
CHILD-SAFE ST CHILD-SAFE ST
As a safety measure, you can program the T761 and
T781 not to start unless the Start button is held down
for three seconds. To do this, follow the steps below:
1. Turn the machine off then on.
2. Press ENTER five times, then press P3 five times.
(This must be done within 15 seconds.)
3. "Delayed start" displays with "0" flashing in the lower
right corner. Press the right Arrow button to toggle
the display to "3."
CHILD-SAFE MENU BUTTON
Please note that when you set the child-safe Start button,
the Menu button is automatically programmed to delay
for three seconds before it becomes active. This prevents
a child from accidentally changing the program settings.
When you want to change a program, press the Menu
button for three seconds to activate the menus. The
Menu button will work normally (without the 3-second
delay) until you have completed your changes. If it is not
pressed for two minutes, it will automatically revert back
to the child-safe mode.
GE GE GE GE
Swedish
Danish
Norwegian
Netherlands
Finnish
AR ART T T T T AR
AR